
Versatile/Can be cut for various purposes from non-metal to metal

Product features
- Versatile thin double-sided reinforced cutting wheel
- Uses silicon carbide abrasive grains, making it possible to cut a wide variety of materials in addition to iron and stainless steel.
- Efficient improvement by eliminating the trouble of changing the grindstone according to the application!
- The thin blade design with a thickness of 1 mm makes cutting crispy!
- A beautiful finish with no chipping of panels, etc.
Use
- Brick: Lightweight (weight) blocks and general bricks are not easily clogged and can be cut cleanly with few chips.
- Stone: Marble and other materials that cannot be cut with a cutting wheel for metals can be cut by marking the stone.
- Tiles: Exterior walls and floor tiles can be cut cleanly with few chips.
- PVC pipe: It is hard to be clogged and suppresses melting and burning.
- Aluminum: Aluminum pipes, thin aluminum plates, aluminum sashes, etc. are less likely to be clogged.
- Iron-based: Less burnt during cutting than other cutting wheels for cutting general steel.
- Stainless steel: Less burnt than other cutting wheels for cutting stainless steel.
- *Multi Seven is not exclusively for iron and stainless steel. Due to its versatile specifications, it may wear out quickly depending on the cutting member.
- *When using the cutting wheel, be sure to attach the special cover for the cutting wheel. Mandated by the Industrial Safety and Health Act.
- *Store the grinding wheel flat in a place free from direct sunlight and humidity.
- *Please wear safety protection when working.
Spec.
Outer diameter x thickness x hole diameter (mm) | Abrasive grain, particle size, hardness | highest Week of use Speed (m/s) | packing | |
small box | Big box | |||
105x1.0x15 | C60P | 80 | 10-sheet | 200-sheet |