- Maximum rotation speed (MAX.rpm) should never be exceeded.
- Protective glasses, dust mask, hard hat, and dust gloves must be worn at all times.
- Safety cover (Toishi cover) must be installed.
- During the work, the grinding powder becomes sparks and scatters, so risk of ignition and explosion should be avoided at all costs.
- Polished surfaces should not have strong pressure applied during work.
How to install disk products
- Insert the support washer into the spindle with the spindle facing up and the convex surface of the support washer facing up.
- Place the convex surface of the disk on the support washer.
- Securely tighten with the holding nut from the top of the disk.
- Press the lock pin with your finger to fix the spindle shaft, and tighten the holding nut with a spanner.
- If there is no lock pin, do not move the disk by hand and tighten the holding nut with a spanner.
Work angle
Clothes for proper work
If used improperly, the product may be destroyed or scattered, resulting in blindness or injury.
Please use it correctly according to the above figure to avoid such danger.
Please use it correctly according to the above figure to avoid such danger.
