
Cutting wheel for stainless steel and metal (double-sided reinforcement)

Ideal for cutting stainless steel.



Product features
- A cutting wheel that has been reinforced on both sides, but has challenged the ultimate thinness.
- It can be cut by pressing lightly without applying force.
- There are few burrs and burns.
- We have a lineup according to the plate thickness (Φ105 only)
Use
- Effective for cutting various types of steel, mainly stainless steel.
- *When using the cutting wheel, be sure to attach the special cover for the cutting wheel. Mandated by the Industrial Safety and Health Act.
- *Store the grinding wheel flat in a place free from direct sunlight and humidity.
- *Please wear safety protection when working.
Spec.
Product code | Outer diameter x thickness x hole diameter (mm) | Abrasive grain, particle size, hardness | highest Week of use Speed (m/s) | Best use Rotation speed (rpm) | packing | |
small box | Big box | |||||
1011050701 | 105x1.0x15 | AZ60P | 80 | 14,400 | 10-sheet | 200-sheet |
1011050708 | 105x1.6x15 | AZ36Q | 80 | 14,400 | 10-sheet | 200-sheet |
1011050709 | 105x2.3x15 | AZ30Q | 80 | 14,400 | 10-sheet | 200-sheet |
1011250121 | 125x1.3x22 | AZ60P | 80 | 12,200 | 10-sheet | 200-sheet |
1011500501 | 150x1.4x22 | AZ60P | 80 | 10,100 | 10-sheet | 100-sheet |
1011800501 | 180x1.5x22 | AZ46P | 80 | 8,490 | 10-sheet | 100-sheet |
1012050501 | 205x1.6x22 | AZ46P | 80 | 7,450 | 10-sheet | 100-sheet |
1013050501 | 305x1.8x25.4 | AZ46P | 80 | 5,010 | 10-sheet | 50-sheet |
1013550501 | 355x2.1x25.4 | AZ46P | 80 | 4,300 | 10-sheet | 30-sheet |
1014050312 | NEW !! 405x2.5x25.4 | AZ36P | 80 | 3,800 | 5-sheet | 20-sheet |
Caution
* In order to fully demonstrate the capabilities of the product, we recommend that you pay attention to the orientation of the grinding wheel when attaching it to the grinder.
Face the surface with the packing and washer toward the grinder and the cutting machine body.
* In order to fully demonstrate the capabilities of the product, we recommend that you pay attention to the orientation of the grinding wheel when attaching it to the grinder.
Face the surface with the packing and washer toward the grinder and the cutting machine body.
● Kin no tamago 105 ~ 205 → When installing, please use the plastic packing facing the grinder body side.
Exterior
